Regular Members

Luoyang Kunyao Metal Material CO.,Ltd

Minerals & Metallurgy

Product category
  • N/A
Friends links
Supplier Homepage > Products > Aluminum Foil for Transformer Winding
Aluminum Foil for Transformer Winding
Click on the image to check the artwork
product: view count: 506Aluminum Foil for Transformer Winding 
unit price: Negotiable
min amount:
period for delivery: Consignment Deadline days
Expiry date: Long Effective
last update: 2017-10-09 13:34

Transformers are designed and built with copper or aluminium windings. But transformers using aluminum foil winding have advantage of small size, light weight, good insulation properties, flame retardant, non-polluting, partial discharge, resistant to moisture, smooth and reliable operation, low noise, and low maintenance cost.
In dry type transformers, aluminium–aluminium windings have been commonly used nowday. Aluminium foil strip can replace copper conductors in distribution transformers. Aluminum foil and sheet in appropriate strip widths and lengths have widely replaced wire in electrical transformers.
Demand for aluminum foil using for oil transformer is new and will be more.

Specification of Aluminium Strips and Aluminium Foils
Grade & Temper Thickness Width
1050/1060/1070/1350-HO(O) 0.2-3.0 mm 20-1350 mm
Inner Diameter Conductivity Number
(% IACS)
Reisitivity number           (Ω·mm² /m)
150/300/400/500 mm ≥61 ≤0.027548
Elongation (%) Tensile strength(Mpa) Density in 20°C
20 >60 2.7kg/cm3
Note: Meet RoHS, SGS, REACH, YS/T 713-2009
Wrought aluminium and aluminium alloy chemical composition
Grade Al(%)
Other elements(%)
1050 99.5 0.25 0.4 0.05 0.05 0.05 0.05 0.03 0.03
1060 99.6 0.25 0.35 0.05 0.03 0.05 0.03 0.03 0.03
1070 99.7 0.25 0.04 0.03 0.04 0.04 0.03 0.03
1350 99.5 0.1 0.05 0.01 0.01 --- --- 0.03

We produce high conductivity roll type electrolytic aluminium strips used to manufacture the windings of electrical transformer, distribution transformer, cast resin transformer.

1. The strip conductor is of high conductivity annealed quality.
2. Slitting is closely controlled to assure strip free of cracks, roughness, scaling, stretch marks.
3. Paper is interleaved between layers of each aluminium coil according to requirement of clients.
4. Each coil is tightly wound.
5. Coil is packed with eye to wall or eye to sky accordingly by sea worthy wooden pallet or box.
6. Foil is free of dents, surface defects, waviness, scale, or any other imperfections which would cause problems in either the winding, performance, or reliability of a quality manufactured dry or wet transformer.
7. The surface and edges of the foil is free of burrs and imperfections. The edges conform to a Round Edge. 
8. The strip is shipped in tightly wound rolls with proper edge register.

If you're looking for aluminum foil for transformer winding, welcome to buy or wholesale the aluminum products from our factory. As one of the leading manufacturers and suppliers, we won't let you down.

inquiry list